Inserts
FRONTAL ARc
Front insert designed to fit into existing or new-build fireplaces. Its forced ventilation system optimises air circulation and distributes heat quickly.
FRONTAL ARc
Renewing the soul of the home with the charm of a lively, efficient fire. The Frontal ARc blends harmoniously into the wall to transform the room with a warm, steady breeze, allowing winter to be experienced in utmost comfort.
Deatures
Preheated primary and secondary air
Introducing pre-heated combustion air avoids cooling the inside of the chamber and significantly increases thermal efficiency. The primary air ensures quick lighting and good control of the fire's intensity, while the pre-heated secondary air promotes the burning of volatile gases and activates the airwash effect to keep the glass clean for longer.
Tertiary or safety air
It consists of an additional air inlet that enables post-combustion. By providing oxygen to burn residual gases before they are evacuated through the chimney, polluting emissions are drastically reduced, the calorific value of the wood is much better utilized, and the accumulation of unburned gases is prevented to guarantee maximum operational safety.
1 mm galvanized steel enclosing casing
Protective casing designed for built-in models in unseen areas of the installation. The galvanized treatment provides the steel with a highly resistant protective layer against corrosion, oxidation, and humidity derived from condensation or the convection air flow, ensuring long durability in internal structures.
Double deflector
It incorporates two plates (metal or refractory) that prevent the direct exit of flames and hot gases into the flue. By forcing the smoke to take a longer and more winding path inside the fireplace, the residence time of the heat inside the chamber is increased, the burning of volatile particles is promoted, and the thermal performance of the unit is notably increased, reducing both fuel consumption and external emissions.
Sectorized hot air direction for front or top outlet
A convection flow management system that offers total control over how the air flow heated by the appliance is distributed. Through mechanisms on the front, the user can prioritize the expulsion of air through the front grilles to quickly heat the main room, or divert all or part of the air to the upper outlets to channel it through ducts to adjacent rooms or upper floors.
Can be supplied without ventilation kit upon request
A configuration option that allows the appliance to be adapted to architectural projects or user needs where forced ventilation with turbines is preferably avoided. By eliminating electromechanical components, the unit operates exclusively by natural convection and radiation, offering absolute operating silence, zero electrical consumption, and great installation simplicity.
Front ash drawer extraction
Direct access system to the waste collection container located at the front of the appliance. This layout allows the container to be handled and emptied very comfortably, quickly, and cleanly, avoiding spreading ash around the room and facilitating daily maintenance tasks for the fireplace with minimum effort.
Reversible door
Modular manufacturing system that allows the position of the hinges and locking mechanism to be modified to choose the opening direction—from right to left or from left to right—as needed. This architectural flexibility is essential for adapting the appliance to the furniture layout and the actual space of the room, preventing the glass from hitting walls or columns and always guaranteeing comfortable and safe handling for the user.
Lateral opening door
Traditional opening mechanism based on vertical hinges located on one side of the appliance's frame. It constitutes the most classic, simple, and robust system for accessing the combustion chamber, allowing direct and comfortable handling both for lighting the fire and placing logs, as well as for ash removal and general fireplace cleaning tasks, guaranteeing a firm and safe mechanical seal at all times.
Possibility of an airtight outdoor air intake
An option that allows all the air necessary for primary combustion to be channeled directly from the outside of the home or a well-ventilated area via a ducted pipe. This system avoids consuming the oxygen in the room and does not interfere with mechanical ventilation or air conditioning systems, making it an essential solution for highly energy-efficient homes, passive houses, or buildings with a high degree of aerothermal airtightness.
M5901V3 + C4240
ARc 65 + KIT 5 ★
M5901V3
ARc 65
M5911V3 + C4210
ARc 70 + KIT 5 ★
M5911V3
ARc 70
M5916V3
ARc 70 A
M5916V3 + C4210
ARc 70 A + KIT 5 ★
M5921V3 + C4220
ARc 70 C + KIT 5 ★
M5921V3
ARc 70 C
M5931V3
ARc 80
M5931V3 + C4230
ARc 80 + KIT 5 ★
M5941V2
ARc 100
M5971V3
ARc 50 V
M5971V3 + C4200
ARc 50 V + KIT 5 ★
13 Products
CERTIFICATES
TECHNICAL SPECIFICATIONS
86,5%
9,5 kW
5,5 - 10 kW
0,028% - 347 mg/Nm³
15 mg/Nm³
2,49 kg/h
118 kg
45 cm / 450 mm
100 mg/Nm³
35 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
77%
8 kW
5,5 - 10 kW
0,099% - 1238 mg/Nm³
24 mg/Nm³
2,6 kg/h
92 kg
45 cm / 450 mm
107 mg/Nm³
66 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
86,5%
10 kW
6 - 10,5 kW
0,028% - 347 mg/Nm³
15 mg/Nm³
2,62 kg/h
112,8 kg
45 cm / 450 mm
100 mg/Nm³
35 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
77%
9,1 kW
6 - 10,5 kW
0,099% - 1238 mg/Nm³
24 mg/Nm³
2,66 kg/h
97 kg
45 cm / 450 mm
107 mg/Nm³
66 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
77%
9,1 kW
6 - 10,5 kW
0,099% - 1238 mg/Nm³
24 mg/Nm³
2,66 kg/h
103 kg
45 cm / 450 mm
91 mg/Nm³
49 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
86,5%
10 kW
6 - 10,5 kW
0,028% - 347 mg/Nm³
15 mg/Nm³
2,62 kg/h
129 kg
45 cm / 450 mm
100 mg/Nm³
35 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
86,5%
10 kW
6 - 10,5 kW
0,028% - 347 mg/Nm³
15 mg/Nm³
2,62 kg/h
118 kg
45 cm / 450 mm
100 mg/Nm³
35 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
77%
9,1 kW
6 - 10,5 kW
0,099% - 1238 mg/Nm³
24 mg/Nm³
2,66 kg/h
92 kg
45 cm / 450 mm
107 mg/Nm³
66 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
77%
10 kW
6,5 - 11,5 kW
0,099% - 1238 mg/Nm³
24 mg/Nm³
2,8 kg/h
121 kg
50 cm / 500 mm
107 mg/Nm³
66 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
86,5%
10,9 kW
6,5 - 11,5 kW
0,026% - 331 mg/Nm³
15 mg/Nm³
2,86 kg/h
149 kg
50 cm / 500 mm
100 mg/Nm³
34 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
79,6%
11,1 kW
7,5 - 13 kW
0,091% - 1142 mg/Nm³
12 mg/Nm³
3,18 kg/h
143 kg
60 cm / 600 mm
107 mg/Nm³
66 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
77,16%
6,3 kW
5,5 - 9,5 kW
0,0564% - 704 mg/Nm³
23 mg/Nm³
2 kg/h
98 kg
33 cm / 330 mm
98 mg/Nm³
53 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
88,3%
9 kW
5,5 - 9,5 kW
0,028% - 347 mg/Nm³
15 mg/Nm³
2,33 kg/h
113,8 kg
33 cm / 330 mm
99 mg/Nm³
35 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
Installation Gallery
XEMENEIES POU
Code : M5916V3
Fireplace name : ARc 70 A
Year of installation : 2025
XEMENEIES POU
Code : M5931V3
Fireplace name : ARc 80
Year of installation : 2026