Stoves
FRONTAL LARIA
Next-generation stove with a much wider front view of the fire and up to 87% efficiency. Stands out for its single-lever combustion control and self-closing door.
FRONTAL LARIA
The new generation of fire arrives to awaken new emotions in the home. The Frontal Laria gives full prominence to the beauty of an immense, serene flame, combining the ancestral magic of firewood with effortless, absolute comfort.
Deatures
Preheated primary and secondary air
Introducing pre-heated combustion air avoids cooling the inside of the chamber and significantly increases thermal efficiency. The primary air ensures quick lighting and good control of the fire's intensity, while the pre-heated secondary air promotes the burning of volatile gases and activates the airwash effect to keep the glass clean for longer.
Tertiary or safety air
It consists of an additional air inlet that enables post-combustion. By providing oxygen to burn residual gases before they are evacuated through the chimney, polluting emissions are drastically reduced, the calorific value of the wood is much better utilized, and the accumulation of unburned gases is prevented to guarantee maximum operational safety.
6 mm steel casing
A very thick outer casing designed to provide maximum structural robustness and high thermal inertia. The 6 mm of steel allow a large amount of heat to be accumulated during combustion and released smoothly and gradually by radiation even hours after the fire has gone out, resisting exceptional mechanical stresses and expansions without deforming.
Double deflector
It incorporates two plates (metal or refractory) that prevent the direct exit of flames and hot gases into the flue. By forcing the smoke to take a longer and more winding path inside the fireplace, the residence time of the heat inside the chamber is increased, the burning of volatile particles is promoted, and the thermal performance of the unit is notably increased, reducing both fuel consumption and external emissions.
Removable log guard
Front safety element located inside the fireplace that prevents logs or incandescent embers from shifting towards the glass or falling outside when the door is opened to feed the fire. Its removable nature is extremely practical when the appliance is off and cold, as it can be easily removed to leave the base completely free and allow for quick ash vacuuming and deep cleaning of the glass without obstacles.
Reversible door
Modular manufacturing system that allows the position of the hinges and locking mechanism to be modified to choose the opening direction—from right to left or from left to right—as needed. This architectural flexibility is essential for adapting the appliance to the furniture layout and the actual space of the room, preventing the glass from hitting walls or columns and always guaranteeing comfortable and safe handling for the user.
Lateral opening door
Traditional opening mechanism based on vertical hinges located on one side of the appliance's frame. It constitutes the most classic, simple, and robust system for accessing the combustion chamber, allowing direct and comfortable handling both for lighting the fire and placing logs, as well as for ash removal and general fireplace cleaning tasks, guaranteeing a firm and safe mechanical seal at all times.
Possibility of an airtight outdoor air intake
An option that allows all the air necessary for primary combustion to be channeled directly from the outside of the home or a well-ventilated area via a ducted pipe. This system avoids consuming the oxygen in the room and does not interfere with mechanical ventilation or air conditioning systems, making it an essential solution for highly energy-efficient homes, passive houses, or buildings with a high degree of aerothermal airtightness.
Single-lever combustion control
A simplified management system that allows the primary and secondary air intakes to be intuitively centralized and regulated using a single mechanical control or lever. This mechanism simultaneously and evenly adjusts the oxygen flow in each combustion phase, greatly facilitating both the lighting process and the precise control of heat output and firewood consumption for the user with a single gesture.
Black replaceable firebrick base
A structural solution for the lower area of the chamber that uses high-density ceramic or refractory material pieces painted black. This material accumulates a large amount of heat to promote excellent combustion of the embers, and at the same time, the dark finish hides soot and highlights the visual contrast of the flames. The replaceable design allows any piece to be easily and economically substituted in case of wear or mechanical impact over the years, without the need to intervene in the main structure.
Black vermiculite interior lining
Interior lining of the combustion chamber made of high-density vermiculite with a black aesthetic finish. Vermiculite provides an exceptional insulating and reflecting capacity that rapidly raises the internal temperature to achieve a very clean, ecological, and efficient fire, while the dark pigmentation offers a modern and elegant finish that gives great visual depth to the fireplace, both when lit and when turned off.
Automatic door closing
A mechanism integrated into the door closure that ensures the door leaf closes by itself once the user pushes it. This function provides a high degree of ergonomics and comfort in daily use.
E4010
LARIA 50
E4010 + T1220 + T2200
LARIA 50 + T
E4033
LARIA 70 A
E4033 + T1220 + T2200
LARIA 70 A + T
E4040
LARIA 80
E4040 + T1220 + T2200
LARIA 80 + T
E4060
LARIA 100
E4060 + T1320 + T2300
LARIA 100 + T
8 Products
TECHNICAL SPECIFICATIONS
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
85%
4,9 kW
4,5 - 7,5 kW
0,0969% - 1212 mg/Nm³
16 mg/Nm³
1,45 kg/h
125 kg
33 cm / 330 mm
99 mg/Nm³
55 mg/Nm³
UNE EN 16510-2-1
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
87%
6,3 kW
4,5 - 7,5 kW
0,0509% - 636 mg/Nm³
14 mg/Nm³
1,66 kg/h
127 kg
33 cm / 330 mm
94 mg/Nm³
34 mg/Nm³
UNE EN 16510-2-1
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
88%
6,5 kW
4,6 - 9,0 kW
0,073% - 907 mg/Nm³
14 mg/Nm³
1,75 kg/h
134 kg
45 cm / 450 mm
99 mg/Nm³
47 mg/Nm³
UNE EN 16510-2-1
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
87%
8,4 kW
4,6 - 9,0 kW
0,052% - 646 mg/Nm³
13 mg/Nm³
2,3 kg/h
136 kg
45 cm / 450 mm
76 mg/Nm³
22 mg/Nm³
UNE EN 16510-2-1
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
87%
6,9 kW
4,6 - 10,5 kW
0,073% - 907 mg/Nm³
14 mg/Nm³
1,86 kg/h
149 kg
50 cm / 500 mm
99 mg/Nm³
47 mg/Nm³
UNE EN 16510-2-1
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
87%
8,8 kW
4,6 - 10,5 kW
0,052% - 646 mg/Nm³
13 mg/Nm³
2,38 kg/h
151 kg
50 cm / 500 mm
76 mg/Nm³
22 mg/Nm³
UNE EN 16510-2-1
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
87%
7,9 kW
4,3 - 11,5 kW
0,07% - 875 mg/Nm³
19 mg/Nm³
2,16 kg/h
184 kg
60 cm / 600 mm
65 mg/Nm³
69 mg/Nm³
UNE EN 16510-2-1
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
88%
9,1 kW
4,3 - 11,5 kW
0,043% - 541 mg/Nm³
15 mg/Nm³
2,4 kg/h
186 kg
60 cm / 600 mm
57 mg/Nm³
35 mg/Nm³
UNE EN 16510-2-1
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
