Fireboxes
FRONTAL M SERIES
Built-in firebox with clean aesthetics and high efficiency featuring a front view of the fire and side-opening door, designed to blend discreetly and elegantly into any space.
FRONTAL M SERIES
Integrated into the architecture like a moving canvas, the Frontal M Series gives full prominence to the spectacle of the flames. Its clean, serene aesthetics provide absolute visual peace, creating the perfect setting to unwind at the end of the day.
Deatures
Preheated primary and secondary air
Introducing pre-heated combustion air avoids cooling the inside of the chamber and significantly increases thermal efficiency. The primary air ensures quick lighting and good control of the fire's intensity, while the pre-heated secondary air promotes the burning of volatile gases and activates the airwash effect to keep the glass clean for longer.
Tertiary or safety air
It consists of an additional air inlet that enables post-combustion. By providing oxygen to burn residual gases before they are evacuated through the chimney, polluting emissions are drastically reduced, the calorific value of the wood is much better utilized, and the accumulation of unburned gases is prevented to guarantee maximum operational safety.
1 mm galvanized steel enclosing casing
Protective casing designed for built-in models in unseen areas of the installation. The galvanized treatment provides the steel with a highly resistant protective layer against corrosion, oxidation, and humidity derived from condensation or the convection air flow, ensuring long durability in internal structures.
Double deflector, upper with three positions for draft adjustment
A system composed of two plates located in the upper part of the combustion chamber that lengthen the path of the gases before they are evacuated. The possibility of regulating the upper plate in three positions allows the appliance's behavior to be adapted to the actual depression of each chimney, compensating for both excessively strong and weak drafts to guarantee balanced firewood consumption, a controllable fire, and maximum heat efficiency.
Includes adjustable and leveling foot
Support system based on mechanical feet that allow the height and inclination of the appliance to be adjusted precisely and independently during installation. This functionality is essential to overcome unevenness, irregularities, or imperfections in the floor, ensuring that the body of the fireplace is perfectly plumb and stable, which ensures optimal operation of the opening and closing of the door and prevents tension in the metal structure.
Lateral opening door
Traditional opening mechanism based on vertical hinges located on one side of the appliance's frame. It constitutes the most classic, simple, and robust system for accessing the combustion chamber, allowing direct and comfortable handling both for lighting the fire and placing logs, as well as for ash removal and general fireplace cleaning tasks, guaranteeing a firm and safe mechanical seal at all times.
Possibility of an airtight outdoor air intake
An option that allows all the air necessary for primary combustion to be channeled directly from the outside of the home or a well-ventilated area via a ducted pipe. This system avoids consuming the oxygen in the room and does not interfere with mechanical ventilation or air conditioning systems, making it an essential solution for highly energy-efficient homes, passive houses, or buildings with a high degree of aerothermal airtightness.
Single-lever combustion control
A simplified management system that allows the primary and secondary air intakes to be intuitively centralized and regulated using a single mechanical control or lever. This mechanism simultaneously and evenly adjusts the oxygen flow in each combustion phase, greatly facilitating both the lighting process and the precise control of heat output and firewood consumption for the user with a single gesture.
Black replaceable firebrick base
A structural solution for the lower area of the chamber that uses high-density ceramic or refractory material pieces painted black. This material accumulates a large amount of heat to promote excellent combustion of the embers, and at the same time, the dark finish hides soot and highlights the visual contrast of the flames. The replaceable design allows any piece to be easily and economically substituted in case of wear or mechanical impact over the years, without the need to intervene in the main structure.
Black vermiculite interior lining
Interior lining of the combustion chamber made of high-density vermiculite with a black aesthetic finish. Vermiculite provides an exceptional insulating and reflecting capacity that rapidly raises the internal temperature to achieve a very clean, ecological, and efficient fire, while the dark pigmentation offers a modern and elegant finish that gives great visual depth to the fireplace, both when lit and when turned off.
Automatic door closing
A mechanism integrated into the door closure that ensures the door leaf closes by itself once the user pushes it. This function provides a high degree of ergonomics and comfort in daily use.
M2200
M3000
M2210
M3500
M2220
M4500
M2200 + T1271
M3000 + T
M2210 + T1272
M3500 + T
M2220 + T1272
M4500 + T
6 Products
TECHNICAL SPECIFICATIONS
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
82,9%
8,8 kW
4,5 - 15 kW
0,097% - 1214 mg/Nm³
18 mg/Nm³
2,43 kg/h
188 kg
45 cm / 450 mm
81 mg/Nm³
58 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
79,5%
10,9 kW
5,6 - 18,7 kW
0,097% - 1214 mg/Nm³
18 mg/Nm³
3,01 kg/h
216 kg
50 cm / 500 mm
88 mg/Nm³
58 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
79,5%
10,2 kW
5,2 - 18,4 kW
0,097% - 1214 mg/Nm³
18 mg/Nm³
2,82 kg/h
226 kg
55 cm / 550 mm
88 mg/Nm³
58 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
86,8%
12,5 kW
4,5 - 15 kW
0,046% - 572 mg/Nm³
9 mg/Nm³
3,28 kg/h
193 kg
45 cm / 450 mm
91 mg/Nm³
23 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
85,1%
15,6 kW
5,6 - 18,7 kW
0,052% - 650 mg/Nm³
9 mg/Nm³
4,09 kg/h
221 kg
50 cm / 500 mm
91 mg/Nm³
23 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
TECHNICAL SPECIFICATIONS
85,1%
15,3 kW
5,2 - 18,4 kW
0,052% - 650 mg/Nm³
9 mg/Nm³
4,01 kg/h
231 kg
55 cm / 550 mm
91 mg/Nm³
23 mg/Nm³
UNE EN 16510-2-2
CERTIFICATES
.webp "ETIQUETA CONTO TERMICO 3.0 (POTSER).webp")
