Manufacturas Rocal S.A
Manufacturas Rocal S.A Fireplaces Stoves Fireboxes Inserts Barbecues
CA ES EN FR IT
Fireplaces
Central / Frontal / Corner / Bioethanol
Stoves
Laria / Habit / Hebar
Fireboxes
G Series / M Series
Inserts
Laris / ARc / RCr
Barbecues
About us
Our team
Contact us
Archive
Distributors area
Installations
Inserts

THREE-SIDED LARIS

Three-sided insert where the black vermiculite lining enhances the visual depth of the fire. With 87% efficiency and single-lever control, it combines maximum efficiency with a wrap-around design.

LARIS TRES CARES.webp
THREE-SIDED LARIS
A panoramic window where the fire shines with extraordinary depth against its dark background. The Three-Sided Laris is synonymous with contemporary well-being: a piece designed for gazing at the flame from anywhere in the room in utmost comfort.
M7045 1.webp
M7050 1.webp
M7050.webp
M7070 1.webp
M7070.webp

Deatures

Preheated primary and secondary air
Preheated primary and secondary air
Introducing pre-heated combustion air avoids cooling the inside of the chamber and significantly increases thermal efficiency. The primary air ensures quick lighting and good control of the fire's intensity, while the pre-heated secondary air promotes the burning of volatile gases and activates the airwash effect to keep the glass clean for longer.
Tertiary or safety air
Tertiary or safety air
It consists of an additional air inlet that enables post-combustion. By providing oxygen to burn residual gases before they are evacuated through the chimney, polluting emissions are drastically reduced, the calorific value of the wood is much better utilized, and the accumulation of unburned gases is prevented to guarantee maximum operational safety.
6 mm steel casing
6 mm steel casing
A very thick outer casing designed to provide maximum structural robustness and high thermal inertia. The 6 mm of steel allow a large amount of heat to be accumulated during combustion and released smoothly and gradually by radiation even hours after the fire has gone out, resisting exceptional mechanical stresses and expansions without deforming.
Double deflector
Double deflector
It incorporates two plates (metal or refractory) that prevent the direct exit of flames and hot gases into the flue. By forcing the smoke to take a longer and more winding path inside the fireplace, the residence time of the heat inside the chamber is increased, the burning of volatile particles is promoted, and the thermal performance of the unit is notably increased, reducing both fuel consumption and external emissions.
Sectorized hot air direction for front or top outlet
Sectorized hot air direction for front or top outlet
A convection flow management system that offers total control over how the air flow heated by the appliance is distributed. Through mechanisms on the front, the user can prioritize the expulsion of air through the front grilles to quickly heat the main room, or divert all or part of the air to the upper outlets to channel it through ducts to adjacent rooms or upper floors.
Removable log guard
Removable log guard
Front safety element located inside the fireplace that prevents logs or incandescent embers from shifting towards the glass or falling outside when the door is opened to feed the fire. Its removable nature is extremely practical when the appliance is off and cold, as it can be easily removed to leave the base completely free and allow for quick ash vacuuming and deep cleaning of the glass without obstacles.
Reversible door
Reversible door
Modular manufacturing system that allows the position of the hinges and locking mechanism to be modified to choose the opening direction—from right to left or from left to right—as needed. This architectural flexibility is essential for adapting the appliance to the furniture layout and the actual space of the room, preventing the glass from hitting walls or columns and always guaranteeing comfortable and safe handling for the user.
Possibility of an airtight outdoor air intake
Possibility of an airtight outdoor air intake
An option that allows all the air necessary for primary combustion to be channeled directly from the outside of the home or a well-ventilated area via a ducted pipe. This system avoids consuming the oxygen in the room and does not interfere with mechanical ventilation or air conditioning systems, making it an essential solution for highly energy-efficient homes, passive houses, or buildings with a high degree of aerothermal airtightness.
Single-lever combustion control
Single-lever combustion control
A simplified management system that allows the primary and secondary air intakes to be intuitively centralized and regulated using a single mechanical control or lever. This mechanism simultaneously and evenly adjusts the oxygen flow in each combustion phase, greatly facilitating both the lighting process and the precise control of heat output and firewood consumption for the user with a single gesture.
Black replaceable firebrick base
Black replaceable firebrick base
A structural solution for the lower area of the chamber that uses high-density ceramic or refractory material pieces painted black. This material accumulates a large amount of heat to promote excellent combustion of the embers, and at the same time, the dark finish hides soot and highlights the visual contrast of the flames. The replaceable design allows any piece to be easily and economically substituted in case of wear or mechanical impact over the years, without the need to intervene in the main structure.
Black vermiculite interior lining
Black vermiculite interior lining
Interior lining of the combustion chamber made of high-density vermiculite with a black aesthetic finish. Vermiculite provides an exceptional insulating and reflecting capacity that rapidly raises the internal temperature to achieve a very clean, ecological, and efficient fire, while the dark pigmentation offers a modern and elegant finish that gives great visual depth to the fireplace, both when lit and when turned off.
Automatic door closing
Automatic door closing
A mechanism integrated into the door closure that ensures the door leaf closes by itself once the user pushes it. This function provides a high degree of ergonomics and comfort in daily use.
LARIS 80 TC
M7050

LARIS 80 TC

LARIS 80 TC + T
M7050 + T1270

LARIS 80 TC + T

LARIS 100 TC
M7070

LARIS 100 TC

LARIS 100 TC + T
M7070 + T1271

LARIS 100 TC + T

4 Products
  • LARIS 80 TC
  • LARIS 80 TC + T
  • LARIS 100 TC
  • LARIS 100 TC + T
TECHNICAL SPECIFICATIONS
LOGO RENDIMENT.webp
LOGO POTÈNCIA NOM.webp
LOGO RANG POTÈNCIA.webp
LOGO CO.webp
LOGO PARTICULES.webp
LOGO KG-H.webp
LOGO PES.webp
LOGO CM TRONCS.webp
LOGO NOx.webp
LOGO OGC.webp
LOGO UE.webp
CERTIFICATES
ETIQUETA A+.webp
ETIQUETA AEFEEC 7.webp
ETIQUETA 4 ESTRELLES.webp
ETIQUETA CONTO TERMICO 3.0 (POTSER).webp
ETIQUETA ECODESIGN.webp
TECHNICAL SPECIFICATIONS
LOGO RENDIMENT.webp
87%
LOGO POTÈNCIA NOM.webp
6,9 kW
LOGO RANG POTÈNCIA.webp
4,6 - 10,5 kW
LOGO CO.webp
0,073% - 907 mg/Nm³
LOGO PARTICULES.webp
14 mg/Nm³
LOGO KG-H.webp
1,86 kg/h
LOGO PES.webp
129,1 kg
LOGO CM TRONCS.webp
45 cm / 450 mm
LOGO NOx.webp
99 mg/Nm³
LOGO OGC.webp
47 mg/Nm³
LOGO UE.webp
UNE EN 16510-2-2
CERTIFICATES
ETIQUETA A+.webp
ETIQUETA AEFEEC 7.webp
ETIQUETA 4 ESTRELLES.webp
ETIQUETA CONTO TERMICO 3.0 (POTSER).webp
ETIQUETA ECODESIGN.webp
TECHNICAL SPECIFICATIONS
LOGO RENDIMENT.webp
87%
LOGO POTÈNCIA NOM.webp
8,8 kW
LOGO RANG POTÈNCIA.webp
4,6 - 10,5 kW
LOGO CO.webp
0,052% - 646 mg/Nm³
LOGO PARTICULES.webp
13 mg/Nm³
LOGO KG-H.webp
2,38 kg/h
LOGO PES.webp
136,6 kg
LOGO CM TRONCS.webp
45 cm / 450 mm
LOGO NOx.webp
76 mg/Nm³
LOGO OGC.webp
22 mg/Nm³
LOGO UE.webp
UNE EN 16510-2-2
CERTIFICATES
ETIQUETA A+.webp
ETIQUETA AEFEEC 7.webp
ETIQUETA 4 ESTRELLES.webp
ETIQUETA CONTO TERMICO 3.0 (POTSER).webp
ETIQUETA ECODESIGN.webp
TECHNICAL SPECIFICATIONS
LOGO RENDIMENT.webp
87%
LOGO POTÈNCIA NOM.webp
7,9 kW
LOGO RANG POTÈNCIA.webp
4,3 - 11,5 kW
LOGO CO.webp
0,07% - 875 mg/Nm³
LOGO PARTICULES.webp
19 mg/Nm³
LOGO KG-H.webp
2,16 kg/h
LOGO PES.webp
134,5 kg
LOGO CM TRONCS.webp
50 cm / 500 mm
LOGO NOx.webp
65 mg/Nm³
LOGO OGC.webp
69 mg/Nm³
LOGO UE.webp
UNE EN 16510-2-2
CERTIFICATES
ETIQUETA A+.webp
ETIQUETA AEFEEC 7.webp
ETIQUETA 4 ESTRELLES.webp
ETIQUETA CONTO TERMICO 3.0 (POTSER).webp
ETIQUETA ECODESIGN.webp
TECHNICAL SPECIFICATIONS
LOGO RENDIMENT.webp
88%
LOGO POTÈNCIA NOM.webp
9,1 kW
LOGO RANG POTÈNCIA.webp
4,3 - 11,5 kW
LOGO CO.webp
0,043% - 541 mg/Nm³
LOGO PARTICULES.webp
15 mg/Nm³
LOGO KG-H.webp
2,4 kg/h
LOGO PES.webp
142 kg
LOGO CM TRONCS.webp
50 cm / 500 mm
LOGO NOx.webp
57 mg/Nm³
LOGO OGC.webp
35 mg/Nm³
LOGO UE.webp
UNE EN 16510-2-2
CERTIFICATES
ETIQUETA A+.webp
ETIQUETA AEFEEC 7.webp
ETIQUETA 4 ESTRELLES.webp
ETIQUETA CONTO TERMICO 3.0 (POTSER).webp
ETIQUETA ECODESIGN.webp
Fireplaces
Stoves
Fireboxes
Inserts
Barbecues
About us (current)
Our team (current)
Contact us (current)
Archive
Distributors area
Installations (current)
T +34 93 881 24 51
info@rocal.es
Instagram
Facebook
LinkedIn
Pinterest
Manufacturas Rocal S.A

This company has received two grants co-financed at 50% by the S.G. for the Management and Implementation of Programmes, Directorate-General for Industrial Programmes, Ministry of Industry and Tourism, charged to funds from the Recovery and Resilience Mechanism within the European Recovery Instrument («Next Generation EU»), in accordance with the Recovery, Transformation and Resilience Plan.

Financial Support Programme for Industrial Research, Development and Innovation Projects in the Field of the Manufacturing Industry – 2022 Call.

Financial Support Programme for Industrial Research, Development and Innovation Projects in the Field of Connected Industry 4.0 (ACTIVA – Financing) – 2022 Call.


European Funds Recovery, Transformation and Resilience Plan Government of Spain, Ministry of Industry and Tourism Funded by the European Union, NextGenerationEU

© 2026 Manufacturas Rocal S.A.
Legal notice Cookies policy Privacy policy
We use our own and third-party cookies to offer our services and collect statistical information. You can accept all cookies by pressing the "Accept" button or configure them or reject their use by clicking on the Cookies policy
Necessary
They are those that allow the user to navigate through a web page, platform or application and use the different options or services that exist on it.
rocal.es avis-cookies 1 year
Cookie necessary for the use of the options and services of the website.
rocal.es PHPSESSID 12 hours
Cookies generated by applications based on the PHP language. This is a general purpose identifier used to hold user session variables. This is typically a randomly generated number, how it is used can be site specific, but a good example is maintaining a logged in state for a user between pages.
rocal.es XSRF-TOKEN 12 hours
It is an encrypted cookie that is used to control that all form submissions are made by the user currently logged in, avoiding CSRF (Cross-Site Request Forgery) attacks.
Analytics
They are those that allow their manager to control and analyze the behavior of the users of the websites to which they are linked.
rocal.es _ga 2 years
The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors.
rocal.es _ga_* 2 years
Google Analytics sets this cookie to store and count page views.
We use our own and third-party cookies to offer our services and collect statistical information. You can accept all cookies by pressing the "Accept" button or configure them or reject their use by clicking on the Cookies policy